Virtual TapeServer 8.0 Quick Start Guide

Virtual TapeServer Quick Start Guide | 5
A second set of IP settings may be required if configuring Instant DR or AutoCopy. It is
recommended that you segregate Instant DR and AutoCopy traffic from network and EMS traffic
to ensure adequate response times.
Finally, in order to log in to configure network settings, you must obtain the serial number of the
VTS server. Note the serial number that is provided on a label on the back of the server.
Review standard operating practices
Standard operating practices include
• Obtaining an ESD protection kit and following the directions that come with the kit.
• Ensuring that your ESD protection kit contains an antistatic table mat and that your ESD
wrist strap has a built-in series resistor.
• Removing all metal accessories before working with the equipment.
• Restraining any dangling items that can get caught in equipment.
• Working in an ESD-protected environment: