Virtual TapeServer 8.0 Quick Start Guide

Virtual TapeServer Quick Start Guide | 7
• VT5930 (may have been shipped with the VT5900-H, VT5900-O, and VT5900-P)
• Power cords
• Serial cable
•Rail kit
• VT5931 (may have been shipped with the VT5900-H, VT5900-O, and VT5900-P)
• HP StorageWorks Modular Smart Array 30 Installation Kit CD
• Power cords
• SAS cables
•Rail kit
Review the VTS server configuration
Here is an overview of the VTS hardware that may have been purchased:
* A dual-port 2Gb FC card (VT5900-FCU) may have been purchased to replace one of the SCSI cards in slot 4 or 5. Also,
VTS assigns ID 6 to the SCSI cards because VTS acts as a SCSI target for virtual devices. Using ID 6 avoids SCSI ID
conflicts with SCSI hosts. Modify settings on the host server or attached physical devices accordingly.
† This is the disk capacity specified by the manufacturer before RAID 5 formatting
VT5900-H VT5900-O VT5900-P
Server DL385 G5 DL185 G5 DL380 G6
Fibre
Channel
and SCSI
Cards
• Two SCSI cards
(four ports),
or one SCSI card (two
ports) and one FC
card (two 2Gb ports)
*
• One FC card
(two 4Gb ports)
• One four-port 4Gb
card, or
• Two four-port 4Gb
cards, or
• One four-port 4Gb
card and one two-
port 4Gb card
• Up to two four-port
4Gb card, or
• One four-port 4Gb
card and up to five
two-port 4Gb cards
Additional
Internal
Storage
Eight 300GB internal
disks (VT5904-H)
If six 1TB or six 2TB
internal disks are
provided, six 2TB disks
can be added
If two 1TB internal
disks are provided, no
additional internal
storage is supported
Not supported
External
Disk
Storage
P2000 MSA (one
VT5930 controller with
12 2TB drives and up to
three VT5931 expansion
chassis, each with 12
2TB drives); maximum
capacity per P2000
system is 96TB
†
• P2000 MSA is
supported as
described for the
VT5900-H, or
• Any SAN-attached
storage device
• P2000 MSA is
supported as
described for the
VT5900-H, or
• Any SAN-attached
storage device
Host
Server
Support
48Up to 15