Release Notes HP Virtual TapeServer for NonStop Servers Product Version: 8.0 February 2012 Part Number: 661327-003 © 2004 - 2012 Hewlett-Packard All rights reserved No part of this document may be copied in any form or by any means without prior written consent of HP. All drawings, schematics and artwork used in the manufacture of the products described herein are copyrighted.
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Overview of features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Related documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Support. . . . . . . . . . . . . . . . . . . . . . . . . .
Manage Virtual Devices (Manage Connections) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . System Settings page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Virtual TapeServer (VTS) is a fully integrated virtual tape, hardware and software solution. VTS offers complete disaster recovery capabilities. As a primary repository for data center backups, VTS can be used as secondary tiered storage for replicated data to meet disaster recovery requirements. Overview of features Release 8.0 introduces the following new features and support to VTS: • Virtual tape library (VTL) support — VTLs can now be created and used for backups.
• Role swap and Remote Export job — Role swapping is now available and provided through the use of Remote Export jobs. See the documentation for full details. • Export and Import can now be performed on standalone drives — The drives can be configured on the System Settings page. The export/import operations are carried out as jobs and are allowed to be canceled allowing full control to the user. See the online help for details.
Related documentation Refer to the following documentation for more information about VTS: • Virtual TapeServerQuick Start Guide, which provides instructions for installing the hardware and configuring VTS on the network. • Virtual TapeServerConfiguration Guide, which describes how to configure VTS and how to use the VTS web interface to manage VTS.
Installation and Configuration This section describes how to access information about installing and configuring release 8.0 of VTS. It also provides compatibility notes. Installation, upgrade, update, and downgrade The following documentation provides information about installing, upgrading, updating, and downgrading VTS: Initial installation and configuration is described in the Virtual TapeServerQuick Start Guide. Instructions to upgrade from 6.04.03, 6.04.04, or 6.04.05 to 8.
Host bus adapter support The following host bus adapters (HBAs) have been tested for use with SPHiNX and IBM Power System servers: For use with Power 7: Feature code CCIN Description 5900 and 5912 572A PCI-X266 Ext Dual-x4 3Gb SAS Adapter 0647, 1912, 5736, 5775 571A PCI-XDDR Dual Channel Ultra320 SCSI Adapter 5749 576B 4 Gigabit PCI-X2 Dual Port Fibre Channel Adapter 5774 5774 4 Gigabit PCI Express Dual Port Fibre Channel Adapter 5735 577D 8 Gigabit PCI-E Dual Port Fibre Channel Adapt
Library Interface HP MSL2024 with LTO3 drives SCSI HP MSL5000 with Ultrium 1 and Ultrium 2 drives SCSI HP MSL6000 with Ultrium 2 drives FC IBM TS3100 with LT04 and LTO5 drives FC, SCSI IBM TS3100 with LTO4 drives FC IBM TS3100 with LTO4 drives FC IBM TS3580 with LTO3 drives FC Overland NEO with LTO5 drives FC The following standalone drives were tested with stacked export jobs: Tape drive Interface HP Storageworks 960 Ultrium3 SCSI HP Storageworks 960 Ultrium3 FC Tape-to-tape exports
Tape drive Interface IBM TS3580-S43 Ultrium 4 SAS Overland Data Ultrium1 SCSI Quantum DLT7000 SCSI Quantum Ultrium LTO2 FC Quantum Ultrium LTO3 SCSI Seagate Viper 200 LTO2 SCSI Storage array support VTS supports any SAN-attached storage array that is supported by CentOS 5.2. Tape drive emulation VTS allows multiple hosts to perform up to 16 simultaneous backups per VTS server.
Backup management application support Host connections are supported with the following backup applications: From Windows Server 2003 hosts: • IBM Tivoli Storage Manager 5.5 • Symantec Veritas NetBackup 6.5 and 7 • Symantec Backup Exec 3.1 • EMC RSA Legato Networker 7.5.2 • CommVault Galaxy 7.0 and 2008 • CA ARCserve Backup r15.0 From Windows Server 2008 hosts: • Symantec Veritas NetBackup 6.5, 6.5.4, and 7.0 • Symantec Backup Exec 2010 • EMC RSA Legato Networker 7.4 and 7.
Upgrade and Downgrade This section provides procedures for upgrading and downgrading the VTS appliance(s) in your environment. It also provides a list of known issues related to upgrade and downgrade. Upgrading to 8.0 You can upgrade to 8.0 from version 6.04.03, 6.04.04, and 6.04.05. During the upgrade, a backup of /usr/local/tape/ is created and upgrade and new operating system RPMs are installed. After the upgrade completes, you can view the upgrade logs from the Manage Logs page of the web interface.
9. Copy the 8.0 ZIP file to an attached vault on the VTS server. For example, if you are upgrading to 8.0, copy the T0868V02^AAP.zip file to the server. Then, unzip the file. Here are command examples: mkdir /VAULT00/8.0upgrade cd /VAULT00/8.0upgrade unzip T0868V02^AAP.zip 10. Stop all VTS services by clicking the appropriate links on the Supervisory Functions page. 11. Click Supervisor Functions on the navigation pane and then click Apply Revision Update. 12. Select From File on the following page: 13.
c.
mount –o loop /VAULT00/8.0upgrade/HPSIM.iso /media/cdrom d. Upgrade HP SIM by entering the following command: /media/cdrom/installHPTools.bash Note e. This script instructs you to reboot after it is finished. Do not reboot now; you will reboot the system in step h below. Unmount and eject the DVD: umount /media/cdrom eject f. Log in to the VTS web interface and click Configuration→Virtual Devices on the navigation pane. g. Click the Submit button in the Manage Port Configuration section of the page. h.
Requires the System Upgrade/Update Functions access right To downgrade VTS 1. Verify that at least 1GB of free disk space is available on the root partition of the VTS appliance before downgrading. 2. If possible, locate the system restore image that was created before the system was upgraded. The version of the system restore image should match the version to which you will be downgrading. Store this image in a safe location. 3. If necessary, log in to the VTS web interface.
Error displayed when downgrading a system that does not have a capacity license. The following error will be seen when downgrading a system that does not have a capacity license: mv: cannot stat '/usr/local/tape/etc/capacity_license': No such file or directory This is a benign error that can be ignored. (TL-6844) Reverting to a previous version may revert the system to an unexpected version.
Upgrade fails because TapeServer process could not be stopped. Processes can be started intermittently by the web server (such as the System Status page) and cron jobs. If one of these processes runs a process from /usr/local/tape/bin during an upgrade, the upgrade could fail. (TL-5007) WORKAROUND: Stop all processes using the service vts-services stop command and then attempt the upgrade again. If this workaround does not result in the processes being stopped, contact Support for assistance.
Resolved Issues and Enhancements The following changes have been incorporated into the software since the 6.04.05 release. Hardware, configuration, and hardware replacement QLogic driver has failover on by default. This conflicts with the use of multipath. The Quick Start Guide now instructs the user to disable failover on the driver. (TL-6460, EAR 7554) Odd characters appeared on-screen when configuring system clock via PuTTY session.
General operations Could not create jobs because the process required for jobs was not running. When a Stacked Export job was the first job to run, a process (RPC Server) that required a particular class to exist for resolution failed in the previous release. To account for that, the web interface is preloaded in the job scheduler process and ensures the process has all classes it needs. (TL-6251) Job process stopped after logrotate and no jobs could start until you rebooted.
Backup performance could be impacted and debug log could grow significantly if cinfo was performed on a bad virtual tape file. The following message appeared in the debug log: [cinfo /VAULT01/SAVE/TM0131 vt] vt_read_block_header: Unable to read block size information. Wanted 4, got 0. This no longer occurs. (TL-5077) Web interface Incorrect link shown after Set Refresh Rate for System Status was performed.
Tape-to-Tape export Tape-to-Tape Exports now available. This release of VTS renamed the Native Export job type; it is now named Tape-to-Tape Export. When you create a Tape-to-Tape Export job, you can choose the format of the content when it is written to physical tape (virtual tape format or host-native format). In addition, if Data Encryption is enabled, content remains encrypted when exported to physical tape (if virtual tape format is selected).
System restore System restore image may have had duplicate database entries. Applying a system restore image may have added duplicate database entries, causing the system to malfunction. This has been fixed. (TL-4003) Utilities and services HP System Insight Manager has been upgraded to version 6.3. HP SIM version 6.3.0.22 is now used on installed systems and upgraded systems. Also, the HP SIM software is no longer available on the VTS installation media. It is now maintained on a separate DVD.
Online help enhanced to list when SMTP notifications are sent. The online help now provides more information about the use of SMTP notifications. (TL-6065) Online help now provides information about restoring replicated tapes from a remote location. Previously, the documentation included instructions for restoring to the originating server.
Known Issues The following known issues, or “errata,” apply to the 8.0 release. The issue tracking number is provided in parentheses. Refer to this number when making inquiries to Technical Support. There is a table of tracking numbers listed in ascending order, with the summary and document section number, in Issue Index on page 61. Hardware, configuration, and hardware replacement Running netconfig on eth1 breaks the eth0 configuration.
Replacing source system on target does not rename files and database records. When a source system is renamed on a target system because of a serial number replacement, all data associated with the original system must be renamed or replaced and permissions adjusted. Contact Support if this condition comes up. (TL-5806) Serial number or replacement system is incorrect after VPD replacement. Target replication system should show new serial number for the source system, which was replaced.
hsm_enable set to YES by default, causing errors when mounting an empty virtual tape. When you attempt to mount an empty virtual tape (no user data in the file, only a label), errors indicating a TSM error occur though TSM is not configured. (TL-6881) WORKAROUND: Set hsm_enable='NO' in the vts.conf file. vtsa user cannot mount virtual tapes. The vtsa user is not able to execute mount commands. (TL-6748) WORKAROUND: Use the bill user instead.
• ems_telnet.pl • hsmdelete.pl • hsmget.pl • hsmput.pl • vtsisc_cancel.pl • vtsisc_mount.pl • vtsisc_unmount.pl • vts_scratch_erase.pl The most common symptom of this problem is that VTS will not be able to log into a host server. Log messages may make it appear as if a password has not been set, though it has been set since encrypted passwords cannot be decrypted.
Encryption allowed on cartridge exceeds cartridge limit. Encryption will cause the size of the data to be larger than when it is unencrypted. If a cartridge contains the maximum amount of data, encrypting the cartridge will cause the cartridge limit to be exceeded. However, no error is given to indicate this situation. The cartridge can be exported but if it is imported to a cartridge of the original cartridge limit size, the import will fail.
Web interface not refreshed after capacity license is applied. After applying a capacity license, the old interface remains displayed and links are missing if you do not refresh the browser. (TL-6866) WORKAROUND: Refresh the browser. Web interface shows login inconsistently. Some pages show that the user is logged in and others show the user as logged out. Others show the user as logged in but you can not get to the page actions, such as downgrading from the System Updates page.
Message on Manage System Licenses page implies that key was saved when it was not. On the Manage System Licenses page, if you select the Update checkbox, paste a license key in the License Key field, and then deselect the Update checkbox, a message is displayed indicating that the license key is already present. The message is displayed even though the key has not been saved. (TL-3175) WORKAROUND: Navigate away from and back to the page.
System Status page lists “No Cartridges” for each GFS vault. A VTS system in a GFS environment may have “No Cartridges” for the vaults, if the GFS environment has had to recover a file, such as a gfs_fsck (file system check) is performed. This issue is due to a permissions problem allowing access to the “lost and found” files. (TL-6515, EAR 7664) System Status page indicates that TEST_UNIT_READY command was processed and complete, but no commands were processed.
Virtual tapes in a VTL are not shown as locked on the Manage Tapes and Pools page. Operations that require a lock still fail as expected for cartridges that are in a VTL. (TL-5969) Manage Virtual Tapes page becomes slow when streaming data and sometimes throws an Internal Server Error. When data-intensive tasks are occurring in the background, accessing the Virtual Tapes page can cause request timeouts. (TL-6667) WORKAROUND: Wait for the operations to complete and try again.
Cartridge Status pop-up dialog is not updated while a cartridge is mounted. If you display the Cartridge pop-up dialog by clicking a link in the size (MB) column of the Configure Tapes and Pools page and then the cartridge is mounted, the data is not updated on the pop-up. (TL-2350) WORKAROUND: View this information when the cartridge is not mounted. Cartridge sizes are not displayed properly. Cartridges created with 1TB, 1GB, or 1MB limits will display, respectively, as 1024GB, 1024MB, and 1024K.
Pool is restored to a cartridge resulting in data not being stored as expected. If an exported pool is restored to a cartridge, the data will not be restored as separate cartridges but will be stored as regular data on one cartridge. (TL-1041) WORKAROUND: Restore pools to pools, not cartridges. Importing a pool into a different pool can create duplicate cartridges. When a pool is imported, the cartridges are created.
Mounts and Locks page allows the removal of locks on VTDs in VTLs. The Mounts and Locks page accessible from the Configure Tapes and Pools page allows the removal of locks on cartridges. It will remove the lock on a cartridge within a VTL, but it will not remove the VTL lock. The correct functionality should be that it does not show cartridges that have the VTL lock, and it does not allow removal of those locks. Note that if you are not using VTLs, you should not use the Mounts and Locks page.
Login button always displayed on Manage Virtual Tapes page. If you log in to the web interface after accessing the Manage Virtual Tapes page, the Login button is displayed until you navigate away from the page and then navigate back. (TL-4429) External Data No rescan available on External Data page. (TL-6604) WORKAROUND: Use the browser's Clear Cache option to rescan the drive to read its current tape information.
Too many values displayed when an error occurs with a LUN during VTD creation. When creating a VTD and an error occurs with an existing LUN, the array of possible values that is displayed can be very large. Instead, the first five possible values should be presented. (TL-3117) VTD names and serial numbers should not be case-sensitive. When creating VTDs, the web interface checks the case of the specified VTD name and serial number.
Cannot create a VTL if LUNs 0, 1, and 2 are not free. If you try to create a VTL, it will fail and indicate that there can only be one VTL per bus, though no other VTLs are defined. LUN 0, 1, and 2 must be free. (TL-4063) Cannot delete VTD in VTL. If you edit a VTL and reduce the drive count to remove a VTD that is included in a VTL, an “Insufficient number of VTD licenses” message may be displayed if you are at the maximum number of VTDs for your license and you cannot delete the VTD.
Must click Restore CUSTOM Defaults button twice to display the “Users and Groups” and “Rights” sections of the page. When you click the Restore CUSTOM Defaults button, the “Users and Groups” and “Rights” sections of the Access Control page are not displayed. You must click the button again to display these sections and restore the custom defaults. (TL-378) Certificate Management Revoking original certificate indicates “Certificate revoked” though it cannot be.
Incorrect error message displayed if attempting to add locked cartridge to library. If the library is full when adding a cartridge to a library, check the Mounts and Locks page to determine if the cartridge is locked. If so, you may receive this message: “Unable to insert cartridge because magazine is full.” A locked cartridge cannot be added to a library, but the error message is incorrect in this case. (TL-4004) WORKAROUND: Resolve the locked condition and then add the cartridge to the library.
editing the definition, the edit operation is allowed even if there are still Physical and Logical Libraries that reference that library definition. The Edit page shows a warning that it is not allowed, but it does not prevent the edit. If the Library definition is edited without all library entities (including Logical and Physical) associated with the Library definition deleted, the web interface and backend protocol layers become inconsistent.
No notification that restore fails because remote key server was not added after restoring from a disaster recovery site. The local key server should be removed prior to restoring the key database. The web interface should notify the user when a restore from a disaster recovery site fails because a local key server already exists. (TL-4399) Key database restore fails if an IP address is used instead of a hostname.
Decrypting a large cartridge with an invalid key takes too long to fail. If the key is invalid or if an incorrect path was given that did not contain the correct key, VTS should fail more quickly. Instead, it can take up to 10 minutes before failing. There are no warning messages indicating that this could take a while for large files. (TL-3052) Creating cartridges in an encrypted pool when Data Encryption is not running generated confusing message.
When restoring a Data Encryption key database, initial attempts may fail and indicate that the file is not found. When restoring a Data Encryption key database with the Restore from the Disaster Recovery option, initial attempts may fail and indicate that the local backup copy is not found, which must be present to do a remote restore. (TL1239) WORKAROUND: Wait five minutes and attempt a restore from disaster recovery again.
Adding a key database backup host fails but lists erroneous error message if too many characters are specified in the fields. When adding a key database backup host and entering very long host names (such as 256 characters), user names (256 characters), or destinations (512 characters), adding the host will fail but the message may indicate that the system was not responding. (TL-1056) Data Encryption automated key database backups do not log their backups to the event.log file.
Scan/Cleanup Scan/Cleanup cannot erase cartridges in VTLs. When running Scan/Cleanup, locked cartridges in a VTL will not be erased after migration even though they meet the criteria to be erased. (TL-4326) WORKAROUND: Disable the VTL or remove the virtual tape from the VTL. Retention time is not displayed correctly on Scan/Cleanup page. Retention is shown in weeks until retention time exceeds a year, then it is shown in years.
Importing cartridges with similar names can be imported to the same virtual tape. If a library has two cartridges with similar names (first 6 characters the same) and they are selected for import, they can be imported to the same virtual tape. This is an error condition that can be avoided by having uniqueness in the first six characters of the cartridge. (TL-6530) WORKAROUND: Tape libraries attached to VTS should be configured to ignore the media version (the Lax at the end of a barcode).
Using the Import/Export interface results in an error in encr_key.log. Invoking an import or tape-to-tape export results in the “Error: missing device specification!” error in encr_key.log. This appears when a pool, a single encrypted tape, or single nonencrypted tape is selected. The message is benign and can safely be ignored. (TL-1035) Import fails if virtual tape meets pool cartridge quota when it is exported.
Login path for CommVault 8 set to /opt/galaxy/Base/qlogin. The path should be set to /opt/simpana/Base. (TL-5707) WORKAROUND: Use the following commands as root: mkdir /opt/galaxy ln -s /opt/simpana/Base /opt/galaxy/Base Utilities do not support X11 forwarding. If X11 forwarding is enabled in the configuration of the SSH putty session, netconfig commands will fail. (TL-5702) Unmigrating encrypted pool fails.
Backup management application support Restoring individual files from export that spanned files using CA ARCserve fails. (TL-6517) WORKAROUND: Restore the entire backup to obtain the single file. TSM running on a host system fails to label tapes when the VTDs are Ultrium. Though the drives are detected and associated with the library, when it tries to load the tapes for labeling, an error is displayed indicating it cannot label the volume.
Status of replication job that failed due to an error is displayed as cancelled. When an error is detected in a replication export or import job that causes the job to be terminated because the “stop on error” flag has been set, the job's overall status will show as “cancelled”. (TL-5862) WORKAROUND: Check the job status details to determine the actual reason why the job ended. Re-replication of virtual tape is possible but cannot be restored.
Virtual tapes are split though target vault is invalid. A virtual tape is split into multiple streams during a remote export even when the target vault is invalid. Once the file is split, replication will fail due to the vault being invalid. It should detect the error before splitting the file. (TL-4267) Rebooting while Replication is splitting files leaves a running job.
Labeling a virtual tape in an Autocopy pool logs error messages in ems.log. Messages similar to the following are logged when a tape in an Autocopy pool is labeled. Sat May 26 07:28:36 2007 TANDEM.TAPE.G06 000659 : DRIVE Sat May 26 07:28:36 2007 doAutoCopy: 2. Sat May 26 07:28:36 2007 autocopy_Host for TOOL14 DEV4: 07-05-26 13:20:09 \DEV4. STATUS 1512 - TOOL14 TAPE DISMOUNTED FROM DEV4: DISMOUNT Cartridge: TOOL14, DEV4: ems_telnet.AUTOCOPY Error is not configured.
Enable Keep Alive and Enable Host Notifications must be selected to enable keep-alive messaging. You must enable both options to enable EMS keep-alive messages. (TL-3152) When mounting a cartridge over another using the web interface, the second does not get mounted if the first cartridge is already dismounted. The web interface may not always be accurate in the state of the tapes in the tape drive. (TL-1752) WORKAROUND: Refresh the interface and try again.
Subject Line Prefix not used in email notifications. Though you can specify a Subject Line Prefix when configuring SMTP settings for email notifications, the prefix is not used. (TL-5137) Clustering (GFS) Cannot resolve the hostname in a GFS environment without a DNS server. Currently, you cannot configure GFS to use a fully qualified domain name without the use of DNS. (TL-6874) Virtual tapes are unusable by other systems if one clustered system crashes.
HP SIM and GFS conflict. A component of HP SIM could conflict with the port used by GFS. This could cause one process to stop functioning if the other one is correctly working. (TL-5252) Activity log is not displaying messages in date order. The latest job should be on the top. (TL-4299) WORKAROUND: Use the Clear Log button to correct the UI. Cannot open message log TAR file. If you attempt to open a message log TAR file, an “Invalid Archive” error is displayed.
Incomplete image created when creating a system restore image with insufficient disk space. If there is not enough space to create a system restore image, the user should be notified that there is not enough space. Instead, “URL not found” message is displayed and files are omitted from the TAR file. (TL-4176) System restore does not handle database restore failure well. If a problem occurs while restoring the database during a system restore, the system may be left with a partial or no database.
Troubleshooting This section includes information about how to troubleshoot problems and notes about items that may need clarification. Installation, upgrades, updates, and restore No disk space available after an upgrade. After an upgrade, there exists the potential to exceed the amount of available disk space. (TL-3885) WORKAROUND: Regularly remove unused files, such as those located in the /tmp and / var/log directories. /usr/local/tape/log/vts-post-install.log contains FATAL error messages.
VTD with no connection to a logical tape is still presented on the bus. If a VTD is created and connected to a logical tape then the VTD is disconnected, the VTD is still shown to the client. An SG device is created and an Inquiry command succeeds. However, a Status command does not and the VTD cannot actually be used. (TL-2324) I/O fails to resume after Fibre Channel cable is disconnected and HBA times out.
Error message displayed on console after the system is booted for the first time. Messages similar to the following are displayed on the console the first time VTS is booted: Mounting other filesystems: [ OK ] Starting hp-ilo:/opt/hp/hp-ilo/drivers/char/hp_ilo/CpqCiKlx.c: In functionoctl32_handler': /opt/hp/hp-ilo/drivers/char/hp_ilo/CpqCiKlx.c:680: warning: assignment makes pointer from integer without a cast /opt/hp/hp-ilo/drivers/char/hp_ilo/CpqCiKlx.
Browser may display old data or errors if not refreshed. If an unexpected error occurs or data appears to be old, refresh the browser. Old data is cached and may need to be cleared. (TL-1662) File size of a mounted tape being written may not be updated. If a virtual tape is mounted and being written to, the size shown on the page may not be updated until the tape is dismounted.
AutoCopy An error message from ems_telnet.pl indicates that AutoCopy is not configured. For AutoCopy to work as designed, manual procedures that mount a tape must end with unmounting the tape. AutoCopy depends on receiving mount and unmount messages through EMS to work correctly, and when a tape is manually mounted, the EMS subsystem is unaware of this. When the manual operation is completed, the tape must be unmounted manually. (TL-1480) VTSPolicy Incremental backup backs up all cartridges.
Issue Index EAR 4030 Device names beginning with $ result in ems_hostdevs and ems_virtdevs are not logged.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 EAR 4286 Virtual tape appears to be created in a locked pool but is not. . . . . . . . . . . . . . . . . . . . . . . 30 EAR 4456 Incremental backup backs up all cartridges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EAR 7554 EAR 7582 EAR 7584 EAR 7585 EAR 7586 EAR 7599 EAR 7626 EAR 7648 EAR 7664 EAR 7670 EAR 7672 EAR 7711 EAR 7772 EAR 7774 EAR 7776 EAR 7793 EAR 7793 EAR 7794 EAR 7847 EAR 7850 EAR 7855 QLogic driver has failover on by default. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Could not log in after long period of inactivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Instant DR page should not default to the RSH method of communication. . . . .
TL-0570 TL-0868 TL-0880 TL-0881 TL-0930 TL-0941 TL-0951 TL-0970 TL-0977 TL-0984 TL-0996 TL-1001 TL-1033 TL-1035 TL-1039 TL-1041 TL-1051 TL-1056 TL-1073 TL-1074 TL-1088 TL-1107 TL-1121 TL-1136 TL-1150 TL-1155 TL-1158 TL-1168 TL-1205 TL-1206 TL-1239 TL-1384 TL-1480 TL-1526 TL-1562 TL-1619 TL-1662 The selected menu item does not correspond to the displayed page when the browser Back or Forward buttons are used to navigate the web interface.. . . . . . . . . . . . . . . . . . . . . . . .
TL-1752 TL-1755 TL-1802 TL-1804 TL-1836 TL-1844 TL-1853 TL-1869 TL-1886 TL-1903 TL-1920 TL-1962 TL-1997 TL-2061 TL-2063 TL-2079 TL-2086 TL-2141 TL-2155 TL-2158 TL-2171 TL-2179 TL-2189 TL-2201 TL-2255 TL-2272 TL-2279 TL-2280 TL-2287 TL-2292 TL-2293 TL-2303 TL-2317 TL-2318 TL-2320 TL-2324 TL-2342 TL-2347 TL-2350 TL-2358 TL-2365 TL-2367 TL-2388 TL-2390 When mounting a cartridge over another using the web interface, the second does not get mounted if the first cartridge is already dismounted. . . . . . . . . .
TL-2529 TL-2551 TL-2629 TL-2641 TL-2645 TL-2770 TL-2772 TL-2885 TL-3001 TL-3005 TL-3011 TL-3012 TL-3020 TL-3032 TL-3041 TL-3048 TL-3052 TL-3063 TL-3071 TL-3105 TL-3117 TL-3125 TL-3151 TL-3152 TL-3156 TL-3165 TL-3168 TL-3170 TL-3171 TL-3175 TL-3190 TL-3196 TL-3212 TL-3278 TL-3300 TL-3304 TL-3310 TL-3320 TL-3377 TL-3429 TL-3440 TL-3456 Autocopy locks the source cartridge but not the target. . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Date and time shown for locked cartridges is incorrect. . . .
TL-3463 TL-3491 TL-3512 TL-3549 TL-3562 TL-3624 TL-3643 TL-3672 TL-3702 TL-3721 TL-3742 TL-3756 TL-3766 TL-3772 TL-3788 TL-3825 TL-3837 TL-3844 TL-3847 TL-3849 TL-3853 TL-3874 TL-3877 TL-3885 TL-3897 TL-3940 TL-3950 TL-3953 TL-3962 TL-3982 TL-3985 TL-4000 TL-4003 TL-4004 TL-4007 TL-4011 TL-4012 TL-4014 TL-4018 TL-4033 TL-4035 TL-4046 TL-4063 TL-4073 TL-4099 TL-4108 TL-4139 TL-4141 TL-4142 TL-4156 Encryption key backup must occur before you can add a remote host. . . . . . . . . . . . . . . .
TL-4163 TL-4176 TL-4191 TL-4199 TL-4232 TL-4235 TL-4260 TL-4265 TL-4267 TL-4286 TL-4287 TL-4299 TL-4308 TL-4311 TL-4312 TL-4313 TL-4325 TL-4326 TL-4371 TL-4391 TL-4396 TL-4398 TL-4399 TL-4414 TL-4429 TL-4434 TL-4439 TL-4447 TL-4456 TL-4464 TL-4466 TL-4469 TL-4536 TL-4607 TL-4616 TL-4620 TL-4669 TL-4670 TL-4689 TL-4691 Information was not updated on the View Sg-Map Information page.. . . . . . . . . . . . . . . . 27 Incomplete image created when creating a system restore image with insufficient disk space.
TL-4779 TL-4804 TL-4806 TL-4822 TL-4854 TL-4857 TL-4859 TL-4922 TL-4940 TL-4953 TL-4956 TL-5007 TL-5023 TL-5034 TL-5063 TL-5077 TL-5111 TL-5132 TL-5133 TL-5137 TL-5159 TL-5177 TL-5179 TL-5196 TL-5200 TL-5203 TL-5207 TL-5227 TL-5239 TL-5246 TL-5252 TL-5306 TL-5313 TL-5456 TL-5502 TL-5538 TL-5586 TL-5677 TL-5698 TL-5702 Long pool name obscures vault and location columns on Manage Virtual Media page. . . 32 Stacked export fails to erase cartridge after export if hsm_erase_after_backup="YES". .
TL-5707 TL-5738 TL-5741 TL-5742 TL-5757 TL-5790 TL-5806 TL-5811 TL-5845 TL-5850 TL-5859 TL-5860 TL-5862 TL-5882 TL-5892 TL-5909 TL-5924 TL-5925 TL-5930 TL-5932 TL-5941 TL-5944 TL-5946 TL-5948 TL-5951 TL-5954 TL-5959 TL-5960 TL-5969 TL-5971 TL-5975 TL-5976 TL-5978 TL-5980 TL-5982 TL-5988 TL-5990 TL-5997 TL-5998 TL-6004 TL-6005 TL-6008 TL-6014 TL-6046 TL-6065 Login path for CommVault 8 set to /opt/galaxy/Base/qlogin. . . . . . . . . . . . . . . . . . . . . . . . 47 Using double quotes in the vts.
TL-6092 TL-6093 TL-6104 TL-6110 TL-6113 TL-6123 TL-6130 TL-6135 TL-6137 TL-6143 TL-6148 TL-6150 TL-6152 TL-6156 TL-6176 TL-6178 TL-6180 TL-6187 TL-6188 TL-6191 TL-6200 TL-6224 TL-6251 TL-6252 TL-6260 TL-6263 TL-6264 TL-6269 TL-6279 TL-6292 TL-6302 TL-6310 TL-6312 TL-6339 TL-6376 TL-6380 TL-6384 TL-6388 TL-6417 TL-6420 TL-6429 TL-6435 TL-6460 Tape library initialization message seen even if no physical tape library was connected to appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TL-6472 TL-6489 TL-6515 TL-6517 TL-6530 TL-6540 TL-6548 TL-6552 TL-6564 TL-6571 TL-6585 TL-6598 TL-6604 TL-6606 TL-6616 TL-6620 TL-6628 TL-6629 TL-6634 TL-6637 TL-6640 TL-6646 TL-6651 TL-6656 TL-6667 TL-6689 TL-6697 TL-6698 TL-6708 TL-6712 TL-6723 TL-6731 TL-6736 TL-6741 TL-6743 TL-6748 TL-6749 TL-6755 TL-6757 TL-6769 TL-6773 TL-6777 TL-6778 TL-6784 Troubleshooting package was over 1GB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TL-6800 TL-6810 TL-6814 TL-6817 TL-6820 TL-6825 TL-6832 TL-6835 TL-6844 TL-6850 TL-6851 TL-6854 TL-6856 TL-6862 TL-6866 TL-6874 TL-6875 TL-6878 TL-6881 TL-6884 TL-6889 TL-6892 TL-6894 TL-6962 Logwatch files do not rotate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Host reservation conflict on AS/400 causes upgrade to fail. . . . . . . . . . . . . . . . . . . . . . . . . 13 Deleting a VTL when TapeServer is stopped does not clean its dependencies. .
