Virtual TapeServer 8.0 Supplemental Installation Guide

Installing GFS | 11

5. Mount the vault by entering this command:

mount /dev/gfsvg1/gfslv1 /VAULT10

6. If luci will not start or restart, enter the following:

service luci start

service luci restart

If luci can see a node but indicates that ricci is not running, but the node shows ricci is

running, output to the similar is displayed:

luci[15356]: Unable to establish an SSL connection to

192.168.80.2:11111: ricci's certificate is not trusted

Enter the following commands to remove luci:

rpm -e luci

rm -rf /var/lib/luci

You may need to reinstall luci or re-import the cluster. The luci RPM is available on the

GFS Install/Upgrade DVD. If necessary, mount the DVD and enter the following

command to install luci:

rpm -ivh /media/cdrom/vts-6.04-gfs-install/luci*.rpm

To review the cluster status, enter the following command:

cman_tool status

Here is an example of the output:

Version: 6.0.1

Config Version: 5

Cluster Name: cma

Cluster Id: 711

Cluster Member: Yes

Cluster Generation: 64

Membership state: Cluster-Member

Nodes: 2

Expected votes: 1

Total votes: 2

Quorum: 1

Active subsystems: 7

Flags: 2node

Ports Bound: 0 11

Node name: 192.168.80.2

Node ID: 2

Multicast addresses: 239.192.2.201

Node addresses: 192.168.80.2