Virtual TapeServer 8.0 Supplemental Installation Guide

Enabling BMA Integration and Migration | 15
hsm_backup_
options
For Backup Express only:
Specifies the backup options for all
pools.
checksum,
EOJ, or
retention
Yes
hsm_backup_
options_poolname
For Backup Express only:
Specifies the backup options for the
pool specified by poolname.
checksum,
EOJ, or
retention
Yes
hsm_restore_device For Backup Express only:
Specifies the restore device.
Name of the
restore device.
No
hsm_optfile For Tivoli Storage Manager only:
Specifies the path to the optfile file.
Default value: dsm.opt
Path Yes
hsm_optfile_pool For Tivoli Storage Manager only:
Specifies the path to the optfile file
for a specific VTS pool. This
parameter overrides the
hsm_optfile parameter for the
pool.
Path No
hsm_put_batch_size For Tivoli Storage Manager only:
Specifies the maximum number of
virtual tapes to lock and migrate at
a time, thereby creating batches of
tapes to migrate. This parameter is
optional and set to 0 by default,
which causes VTS to lock all target
virtual tapes until the migration is
complete.
Note: Using this parameter may
impact performance, slowing the
migration.
Integer, from
1-30
No
hsm_policy For NetBackup only:
Specifies the backup policy.
Policy Yes
hsm_schedule For NetBackup only:
Specifies the backup schedule.
(Typically, a User schedule is
specified.)
The schedule
name
Yes
hsm_client For CommVault Galaxy only:
Specifies the hostname or IP
address of the VTS server on which
the CommVault client is installed.
Hostname or
IP address
Yes
Parameter Description Values Req’d?