Virtual TapeServer 8.0 Supplemental Installation Guide

Hardware Information for Legacy Installations | 49
Connecting to the HP ProLiant DL185 G5 (VT5900-K)
Note The VT5900-O that ships with version 8.0 is also built on the DL185 G5. Refer to the
8.0 Quick Start Guide for connection information for this server.
Here is an illustration of the back of the VT5900-K:
The second 4Gb FC card (VT5900-FC4) shown in slot 2 is optional and may not be installed.
1. Power plugs
2. PS/2 port
3. PS/2 port
4. Serial port
5. FC port (slot 3, port
A)
6. FC port (slot 3, port
B)
7. Ethernet ports
8. USB ports
9. Mgmt port
10. VGA port
11. FC port (slot 2,
port A)
12. FC port (slot 2,
port B)