Virtual TapeServer 8.2 Configuration Guide
Table Of Contents
- Virtual TapeServer for NonStop Servers Configuration Guide
- Preface
- Introduction
- Overview of Tasks
- Reconfiguring Vaults
- Enabling Licensed Features
- Configuring Ports
- Creating and Managing VTLs and VTDs
- Enabling and Performing Tape-to-tape Exports
- Enabling and Performing Stacked Exports
- Enabling and Configuring Data Replication
- Enabling and Configuring Role Swapping
- Configuring EMS Communication
- Enabling and Configuring Data Encryption
- Creating and Managing Virtual Media
- Enabling and Configuring Scan/Cleanup
- Configuring User Accounts
- Configuring Web Interface Preferences
- Managing the VTS Server
- Troubleshooting
- Maintaining GFS for VTS
- Reinstalling and Restoring VTS
- Attaching External Devices after Initial Deployment
- TCP/IP Ports and Protocols
- Index
104 | Configuring User Accounts
c. In the add group field, type a name for the group.
d. Click APPLY.
5. Add the user to the group:
a. Deselect the new user in the Users drop-down list and select it again to enable the
CHANGE GROUP button.
b. Click CHANGE GROUP.
c. Select the group from the in Group drop-down list.
d. Click APPLY.
6. Assign rights to the group:
a. Expand + to expand Rights.
b. Select the 1.3 Virtual Tape Operations access right only.
c. Click APPLY.
Creating a user
Requires the System Access Controls access right
To create a user
1. Click Security→Access Control on the navigation pane.
2. If prompted, log in. After logging in, the Manage Access Control page is displayed.