Virtual TapeServer 8.2 Configuration Guide

Configuring Web Interface Preferences | 117
Here is an example of these parameters:
opwin_Mount="YES"
opwin_Unmount="YES"
opwin_Erase="YES"
opwin_Delete="YES"
opwin_ImportExport="YES"
opwin_Migrate="YES"
opwin_AllowAutoRefresh="NO"
opwin_ShowLimits="YES"
opwin_ShowReadOnly="NO"
opwin_ShowCompression="YES"
opwin_ShowLastWritten="NO"
opwin_filesystem_alert="90"
notifications="NO"
notifications_interval="60"
free_space_status='YES'
status_ChangeRate="YES"
status_StopStart="YES"
4. Click the SAVE button.
lowspace_notify Enables notification on low vault space. If
EMS is enabled, a message is also sent to
the NonStop host server (the
ems_hsm_backup_notification or
ems_notification_enable parameter
must also be set to YES).
Default value: YES
YES or NO
lowspace_notify_keep Specifies whether to continue to display
the low vault space notification until it is
no longer valid.
Default value: NO
YES or NO
free_space_status Specifies whether to display the Free
Space information (for each vault) on the
System Status page.
Default value: YES
YES or NO
status_ChangeRate Specifies whether to display the CHANGE
RATE button on the System Status page.
Default value: YES
YES or NO
status_StopStart Specifies whether to display the Stop/Start
Refreshing button on System Status.
Default value: YES
YES or NO
Parameter Description Values