Virtual TapeServer 8.2 Configuration Guide
Table Of Contents
- Virtual TapeServer for NonStop Servers Configuration Guide
- Preface
- Introduction
- Overview of Tasks
- Reconfiguring Vaults
- Enabling Licensed Features
- Configuring Ports
- Creating and Managing VTLs and VTDs
- Enabling and Performing Tape-to-tape Exports
- Enabling and Performing Stacked Exports
- Enabling and Configuring Data Replication
- Enabling and Configuring Role Swapping
- Configuring EMS Communication
- Enabling and Configuring Data Encryption
- Creating and Managing Virtual Media
- Enabling and Configuring Scan/Cleanup
- Configuring User Accounts
- Configuring Web Interface Preferences
- Managing the VTS Server
- Troubleshooting
- Maintaining GFS for VTS
- Reinstalling and Restoring VTS
- Attaching External Devices after Initial Deployment
- TCP/IP Ports and Protocols
- Index
Reconfiguring Vaults | 11
Adding vaults on external storage devices
If an external storage device is connected to VTS, you can use it to configure additional vaults.
Up to 100 vaults are supported per VTS server.
Note If GFS is used in your VTS environment, see Maintaining GFS for VTS on page 157
for instructions to create vaults.
To add a vault to VTS
1. If necessary, connect the external storage device to VTS. Make sure that the cable is
plugged in and the link light is illuminated (for Fibre Channel) on the VTS server. The
port to which the external storage device is attached must be set to “physical”. See
Configuring Ports on page 19 for more information.
2. Set up a partition on the external storage device (if necessary, ask your storage area
network administrator for assistance). The maximum size supported by VTS is 5TB.
3. Identify the disks.
a. Log in to the VTS server.
b. Become root:
su -
c. Enter the following command to determine the disk partitions:
fdisk -l
Output similar to the following is displayed (/dev/sd* devices are listed for external
storage and /dev/cciss/* devices are listed for internal storage):
Disk /dev/cciss/c0d0: 72.8 GB, 72833679360 bytes
255 heads, 32 sectors/track, 17433 cylinders
Units = cylinders of 8160 * 512 = 4177920 bytes
Device Boot Start End Blocks Id System
/dev/cciss/c0d0p1 * 1 25 101984 83 Linux
/dev/cciss/c0d0p2 26 5045 20481600 83 Linux
/dev/cciss/c0d0p3 5046 5559 2097120 82 Linux swap / Solaris
/dev/cciss/c0d0p4 5560 17433 48445920 83 Linux
Disk /dev/sda: 566.3 GB, 566391471616 bytes
255 heads, 63 sectors/track, 68859 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 68859 553109886 83 Linux
Disk /dev/sdb: 524.2 GB, 524289048064 bytes
255 heads, 63 sectors/track, 63741 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 63741 511999551 83 Linux
Disk /dev/sdc: 524.2 GB, 524286222336 bytes
255 heads, 63 sectors/track, 63740 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes