Virtual TapeServer 8.2 Configuration Guide
Table Of Contents
- Virtual TapeServer for NonStop Servers Configuration Guide
- Preface
- Introduction
- Overview of Tasks
- Reconfiguring Vaults
- Enabling Licensed Features
- Configuring Ports
- Creating and Managing VTLs and VTDs
- Enabling and Performing Tape-to-tape Exports
- Enabling and Performing Stacked Exports
- Enabling and Configuring Data Replication
- Enabling and Configuring Role Swapping
- Configuring EMS Communication
- Enabling and Configuring Data Encryption
- Creating and Managing Virtual Media
- Enabling and Configuring Scan/Cleanup
- Configuring User Accounts
- Configuring Web Interface Preferences
- Managing the VTS Server
- Troubleshooting
- Maintaining GFS for VTS
- Reinstalling and Restoring VTS
- Attaching External Devices after Initial Deployment
- TCP/IP Ports and Protocols
- Index
50 | Enabling and Configuring Role Swapping
c. At the command prompt, enter ssh user@server uptime. For example, on Server B,
enter ssh bill@server_b uptime.
The first time you enter an ssh command, a message similar to the following is
displayed:
The authenticity of host 'server_name (IP_addr)' can't be
established.
RSA key fingerprint is
5f:10:3c:47:78:8f:e3:28:9d:ab:6b:34:ed:d1:e4:08.
Are you sure you want to continue connecting (yes/no)?
Enter yes.
d. Repeat these steps on each VTS server.
Note SSH can be setup for one direction or multiple directions. If multiple directions
are configured, these steps should be executed from each direction.
Enabling Data Replication licensing
Before you can use the Data Replication feature, you must enable licensing.
Requires Administration group membership
To enter a license key
1. Click Configuration→System on the navigation pane.
2. Click Manage System Licenses. A page similar to the following is displayed:
3. Enter the license key as described in the help. To view the help, click the Help button at
the top of the page.