Virtual TapeServer 8.2 Configuration Guide
Table Of Contents
- Virtual TapeServer for NonStop Servers Configuration Guide
- Preface
- Introduction
- Overview of Tasks
- Reconfiguring Vaults
- Enabling Licensed Features
- Configuring Ports
- Creating and Managing VTLs and VTDs
- Enabling and Performing Tape-to-tape Exports
- Enabling and Performing Stacked Exports
- Enabling and Configuring Data Replication
- Enabling and Configuring Role Swapping
- Configuring EMS Communication
- Enabling and Configuring Data Encryption
- Creating and Managing Virtual Media
- Enabling and Configuring Scan/Cleanup
- Configuring User Accounts
- Configuring Web Interface Preferences
- Managing the VTS Server
- Troubleshooting
- Maintaining GFS for VTS
- Reinstalling and Restoring VTS
- Attaching External Devices after Initial Deployment
- TCP/IP Ports and Protocols
- Index
Creating and Managing Virtual Media | 83
To erase or delete a virtual tape from the Configure Tapes and Pools page
1. Unmount the virtual tape first, if it is mounted.
2. Click Configuration→Tapes and Pools on the navigation pane. The Configure Tapes
and Pools page is displayed.
3. Select a virtual tape in the cartridge column. You may need to expand a pool to see the
list of virtual tapes.
4. Click Erase to erase the contents or click Delete to delete the entire tape.
Note If the Erase or Delete button is not displayed, see You can set a number of
parameters in the VTS configuration file to specify the following: on page 115 for
information about displaying these buttons.
5. When prompted, click OK to confirm the operation.