Virtual TapeServer 8.3 Configuration Guide

148 | Virtual TapeServer Configuration Guide
Right Description
Virtual Tape Pool Maintenance Grants access to the Virtual Media - Pool
Maintenance page
Erase Cartridges Enables the user to erase virtual tapes from the
Configure Tapes and Pools and Virtual Media -
Cartridge Maintenance pages
HSM Migration Enables the user to migrate virtual tapes using
the Migrate button on the Configure Tapes and
Pools page
Mount Cartridges Enables the user to manually mount virtual
tapes using the Mount button on the Configure
Tapes and Pools page
Unmount Cartridges Enables the user to unmount virtual tapes using
the Unmount button on the Configure Tapes and
Pools page
View System Status Grants access to the System Status page
Change Refresh Rate Enables the user to change the refresh rate of
the System Status page from the System Status
page
Stop and Start TapeServer Enables the user to start and stop VTS from the
Manage System Tasks page
Vault Access Provides access to vaults.
Access to All Vaults Provides access to any vault and vault contents.
5. To modify access rights assigned to the Operations group, select the checkbox next to each
access right in the Operations column. See the previous step for a description of each right.
6. To modify access rights assigned to the Supervisor group, select the checkbox next to each
access right in the Supervisor column. See step 4 for a description of each right.
7. Click APPLY above the table to save your changes.