Virtual TapeServer 8.3 Quick Start Guide

Virtual TapeServer Quick Start Guide | 5
Model # Type Description
Up to 5 Ethernet To connect VTS to the network for
LAN/WAN connectivity and for HP
Integrated Lights-Out (iLO) support.
For the most reliable service, use cables of the highest quality and shortest possible length based on
the location of the equipment in the data center. The following is a list of HP cables and their part
numbers, which are provided by HP for VTS installations. (These cables are provided if listed in the
CPSA description for the PID.)
l LC-PC, Multimode Fibre cable, 2 m, part number M8900-02
l LC-PC, Multimode Fibre cable, 5 m, part number M8900-05
l LC-PC, Multimode Fibre cable, 15 m, part number M8900-15
l LC-PC, Multimode Fibre cable, 40 m, part number M8900-40
l LC-PC, Multimode Fibre cable, 80 m, part number M8900-80
Review standard operating practices
Standard operating practices include
l Obtaining an ESD protection kit and following the directions that come with the kit.
l Ensuring that your ESD protection kit contains an antistatic table mat and that your ESD wrist
strap has a built-in series resistor.
l Removing all metal accessories before working with the equipment.