Virtual TapeServer 8.3 Quick Start Guide

6 | Virtual TapeServer Quick Start Guide
l Restraining any dangling items that can get caught in equipment.
l Working in an ESD-protected environment:
Unpack and identify the hardware
Before mounting and cabling VTS, you must unpack the hardware and verify the box contents.
Unpack all hardware
1. Unpack all hardware and retain packing materials.
Note Always lift the VTS appliance by the sides. Because the hardware is heavy, it is
recommended that you use an assistant when lifting it.
2. Inspect the hardware and the contents of the box(es). If damage is apparent, contact the
carrier and your vendor.
3. Place hardware on a flat, stable work surface.