Virtual TapeServer 8.4 Configuration Guide

Creating and Managing Virtual Media | 103
To view mounts
Requires the Virtual Tape Mounts and Locks access right
Click Administration > Mounts and Locks on the navigation pane.
The top of the page shows the recent mount requests. Only mount requests that can be handled by
the server are displayed. You can also restart the EMS messaging service from this page by clicking
the RESTART button.
Unmounting virtual tapes
You can unmount a virtual tape from a standalone VTD only. VTDs in VTLs are controlled by
initiating hosts only.
To unmount a virtual tape
Requires the Mount Cartridges, Vault Access, and Access to all Vaults access rights
Use this procedure if a capacity license is enabled on the server.
1. Click Administration > Virtual Drives on the navigation pane.
2.
Click next to the drive that contains the virtual tape you want to unmount.
Use this procedure if a VTD license is enabled on the server.
1. Click Administration > Virtual Tapes on the navigation pane.
2. Click the Advanced Media Actions link in the upper right corner of the page.