Virtual TapeServer 8.4 Configuration Guide

Configuring User Accounts | 143
Enabling closed access and restricting access to virtual tapes
If you want to create an account that does not have access to virtual tapes, complete this procedure.
To restrict access to virtual tapes
1. Log in using the admin account.
2. Enable a closed system as described in "Enabling a closed system using default users and
groups" on page 140.
3. Add a user as described in "Creating a user" on page 144.
4. Add a group:
a. Click + to expand Users and Groups.
b. Click ADD next to Groups.
c. In the add group field, type a name for the group.
d. Click APPLY.
5. Add the user to the group:
a. Deselect the new user in the Users drop-down list and select it again to enable the
CHANGE GROUP button.
b. Click CHANGE GROUP.
c. Select the group from the in Group drop-down list.
d. Click APPLY.
6. Assign rights to the group:
a. Expand + to expand Rights.
b. Select the 1.3 Virtual Tape Operations access right only.
c. Click APPLY.