Virtual TapeServer 8.4 Configuration Guide

Configuring Web Interface Preferences | 157
Parameter Description Values
tape is loaded in a VTD, the column
indicates “ro” for read-only or “rw” for
read-write. Otherwise, the read-only flag
column is blank for all virtual tapes in
every pool.
Default value: NO
opwin_ShowCompression Displays the compression ratio (c/ratio)
column on the Virtual Media - Operation
page.
Default value: YES
YES or NO
opwin_ShowLastWritten Displays the last written column on the
Virtual Media - Operation page.
Default value: NO
YES or NO
opwin_filesystem_alert Sets the percentage for the /VAULTxx file
system usage alert on the Virtual Media -
Operation page. Set this parameter to a
value greater than 0, or set it to 0 to
disable the feature. If EMS is enabled, a
message is also sent to the NonStop host
server.
Default value: 90
Integer
notifications_interval Specifies how often to check for
notifications, in seconds.
Default value: 60
Integer
lowspace_notify Enables notification on low vault space. If
EMS is enabled, a message is also sent to
the NonStop host server (the ems_hsm_
backup_notification or ems_notification_
enable parameter must also be set to
YES).
YES or NO