Virtual TapeServer 8.4 Configuration Guide

40 | Virtual TapeServer Configuration Guide
Total Errors = 0 Total Warnings = 0
If unsuccessful, messages similar to the following are displayed:
SCF - T9082G02 - (06JAN06) (31OCT05) - 01/19/2007 09:09:06 System \DEV3
(C) 1986 Tandem (C) 2006 Hewlett Packard Development Company, L.P.
STORAGE E00002 START TAPE \DEV3.$TAPE30 rejected, file system error:
190STOPPED: 0,63
CPU time: 0:00:00.033
3: Premature process termination with fatal errors or diagnostics
Total Errors = 1 Total Warnings = 0
If system error 190 or 224 occurs, check the cable connections and confirm that they are attached to
the proper location as specified by the LOCATION parameter in the ADD command. It is also
recommended that you check the port on VTS to confirm that it is in the proper location based on the
port number on which the VTD is configured. Finally, check that the SCSI converter is powered on and
functioning properly.
If you need to stop a virtual tape drive at any time, such as if a problem occurs on the host or you
want to move the location of the connection to the host, enter the following command on the NonStop
server:
SCF STOP TAPE $VTD
Ensure that no virtual tapes are loaded in the virtual tape drive before issuing this command.