Virtual TapeServer 8.4 Configuration Guide
Configuring EMS Communication | 81
d. Enter yes to accept the fingerprint.
e. Exit by pressing CTRL+C.
If a mismatch occurs after accepting the fingerprint, you can edit the /home/bill/.ssh/known_
hosts file to remove lines for host server whose key has changed. Then, after the obsolete key
has been removed, repeat this step to accept the new key.
6. Click Stop EMSService and then click Start EMSService on the Manage System Tasks page to
restart the EMS service. You must start or restart the service to enable VTS to reread the
configuration file.
7. To send notifications to the NonStop server, you must configure several parameters in the VTS
configuration file, as follows:
a. Click Configuration > System on the navigation pane.
b. Click Edit Configuration File.