Virtual TapeServer 8.4 Supplemental Installation Guide

Installing GFS | 11
b. Enter the following commands on the console of the node:
mkdir /VAULT10
mount -a -t gfs
chown bill.root /VAULT10
chmod 755 /VAULT10
ls -al /VAULT10
The following is an example of output for the ls command:
total 12
drwxr-xr-x 2 root root 3864 May 15 15:24 .
drwxr-xr-x 4 root root 4096 May 15 17:59 ..
c. Enter the following command to verify that there is free space on the mounted GFS file
system.
df -H /VAULT10
Here is an example of the output:
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/gfsvg1-lv1 17G 36K 17G 1% /VAULT10
d. Enter the following command to verify that you can write to the mounted GFS file
system.
touch /VAULT10/`hostname`
e. Verify that files written by other VTS servers are visible by entering the following
command:
ls -al /VAULT10
Here is an example of the output:
total 28
drwxr-xr-x 2 root root 3864 May 16 11:32 .
drwxr-xr-x 4 root root 4096 May 15 17:59 ..
-rw-r--r-- 1 root root 0 May 16 11:32
vtsdev27.commstor.crossroads.com
After completing these steps on each node, this output lists each system's hostname in
the vault directory. Be sure to delete these files after completing this installation
procedure.