Virtual TapeServer 8.4 Supplemental Installation Guide

14 | Virtual TapeServer Supplemental Installation Guide
If luci can see a node but indicates that ricci is not running, but the node shows ricci is
running, output to the similar is displayed:
luci[15356]: Unable to establish an SSL connection to
192.168.80.2:11111: ricci's certificate is not trusted
Enter the following commands to remove luci:
rpm -e luci
rm -rf /var/lib/luci
You may need to reinstall luci or re-import the cluster. The luci RPM is available on the GFS
Install/Upgrade DVD. If necessary, mount the DVD and enter the following command to install
luci:
rpm -ivh /media/cdrom/vts-6.04-gfs-install/luci*.rpm
To review the cluster status, enter the following command:
cman_tool status
Here is an example of the output:
Version: 6.0.1
Config Version: 5
Cluster Name: cma
Cluster Id: 711
Cluster Member: Yes
Cluster Generation: 64
Membership state: Cluster-Member
Nodes: 2
Expected votes: 1
Total votes: 2
Quorum: 1
Active subsystems: 7
Flags: 2node
Ports Bound: 0 11
Node name: 192.168.80.2
Node ID: 2
Multicast addresses: 239.192.2.201
Node addresses: 192.168.80.2