Virtual TapeServer 8.4 Supplemental Installation Guide

Enabling and Configuring AutoCopy and Instant DR | 33
Parameter Description Values
not need to exist on the target
server; it will be created, if
necessary.
You can also set this parameter to a
vault and server, which defines the
target path on the server.
You can set this parameter to a pool
on a target VTS server; in this case,
VTS determines the vault in which
the pool resides on the target
system.
In all cases, ensure that no virtual
tape name on the target system
matches the name of any virtual
tapes to be copied (they will be
overwritten). Also, the vaults on the
originating and target VTS systems
cannot reside in the same GFS file
system, if GFS is used.
You can omit this parameter and set
the autocopy_target_ANYPOOL
parameter to specify the target for
all pools.
autocopy_target_
ANYPOOL
Specifies the target of the copy
operation for all pools set by
autocopy_pools. Specify this
parameter if you do not set the
autocopy_target_poolname
parameter for each pool in
autocopy_pools. See details about
how to set this parameter in the
description of autocopy_target_
poolname.
VTS system name
or, vault on a VTS
system, such as
/VAULT00/server1
or, pool on a target
system, such as
server1:pool1