Virtual TapeServer 8.4 Supplemental Installation Guide

SCSI-to-Fibre Channel Adapter Upgrade | 47
PCI Slot Bus Number Card Type Virtual Tape Name
controller card)
4 A 0 2G Fibre $VTAPE00
4 B 1 2G Fibre $VTAPE01
5 A 2 2G Fibre $VTAPE02
5 B 3 2G Fibre $VTAPE03
d. Click Submit. Confirm to reboot the server.
8. Use the VTS web interface to reconfigure a VTD.
After the Fibre Channel ports are configured as virtual devices, the final step in this process is
to reconfigure the VTDs. VTDs originally set up as SCSI need to be edited for use on a Fibre
Channel port.
Refer to the steps documented in the online help. When changing the properties, change the
Target from 5 to 0 from the drop-down box. Repeat the steps for each VTD that needs to be
updated.
9. When the startup process is complete, open a terminal window on VTS and log in. Then, enter
su - to become root. Using a text editor, remove the lines that were commented out in step 3
(remove the # sign in front of each vault, such as #LABEL=/VAULT01 becomes
LABEL=/VAULT01). Do this for all vaults.
10. Save all changes and exit the editor.
11. Reboot VTS.