Virtual TapeServer 8.4 Supplemental Installation Guide

Hardware Information for Legacy Installations | 61
Connecting to the HP ProLiant DL380 G6 (VT5900-L)
Note The VT5900-P that ships with version 8.4 is also built on the DL380 G6. Refer to the 8.4 Quick
Start Guide for connection information for this server.
Here is an illustration of the back of the VT5900-L (base model):
1. 4Gb FC ports (slot 2)
2. 4Gb FC ports (slot 3)
3. Power plugs
4. 4Gb FC ports (slot 6)
5. Ethernet ports 4 and 3
6. iLO port
7. Serial port
8. PS/2 ports
9. Ethernet ports 2 and 1
10. VGA port
11. USB ports
An FC card (VT5900-FC4) may be installed in slot 5 (above slot 6). A FC card (VT5900-FC4) may also
be installed in slot 1 (above the fan and power plug on the left), replacing the P800 card that is
installed in the base model.
Connecting to the HP ProLiant DL185 G5 (VT5900-O)
Here is an illustration of the back of the VT5900-O:
1. Power plugs
2. PS/2 port
3. PS/2 port
4. Serial port
5. Ethernet ports
6. USB ports
7. Mgmt port
8. VGA port
9. FC ports (slot 1)