Virtual TapeServer SCSI-to-FC Adapter User Manual

7-6
Chapter 7: Using the Serial/Telnet Interface
Ethernet and SNMP Configuration
This option allows for setting up all Ethernet network settings including IP address, Subnet mask,
IP gateway, SNMP and security settings, Ethernet mode, physical address, and hostname.
Figure 7-5. Ethernet configuration menu
• Select 1 to change the IP address of the VT5900-SA.
• Select 2 to change the IP Subnet mask for the VT5900-SA. The default for this setting is
255.255.255.0.
• Select 3 to change the IP gateway for the Ethernet network of the VT5900-SA.
• Select 4 to change the Ethernet Physical Address, or MAC address, of the VT5900-SA.
Ethernet physical addresses are always assigned to Ethernet adapters by the manufacturers.
Ethernet Configuration Menu
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
IP Address : 192.168.150.178 [DHCP]
Subnet Mask : 255.255.255.0
IP Gateway : 192.168.150.1
Ethernet Physical Address : 00:E0:02:E2:49:C7
Ethernet Mode : 10/100Mbps (Auto-Neg)
Hostname : Router
DHCP Configuration : Enabled
1) Change IP Address
2) Change IP Subnet Mask
3) Change IP Gateway
4) Change Ethernet Physical Address
5) Toggle Ethernet Mode
6) Change Hostname
7) Toggle DHCP Configuration
8) Change SNMP Settings
9) Change Security Settings
X) Return to previous menu