Virtual TapeServer SCSI-to-FC Adapter User Manual

7-8
Chapter 7: Using the Serial/Telnet Interface
• Select 9 to change security settings, including the username and password. Usernames and
passwords should be unique and kept confidential. It is recommended to use a combination of
letters and numbers when creating usernames and passwords.
SNMP Configuration
The SNMP Configuration menu is accessible through the Ethernet Configuration menu and allows
for various SNMP options to be configured. This includes the Trap Manager IP address,
community names, and the Trap priority.
Current SNMP Configuration indicates the community names for GET and SET and indicates
trap status, including the Manager IP Address for enabled traps.
Figure 7-6. SNMP configuration menu
The SNMP GET community name is checked for each GET request received by the VT5900-SA.
The community name in the SNMP packet must match the community name configured here for
the SNMP GET request to be successfully completed. Configure your SNMP manager to have the
same GET and SET community names as the VT5900-SA.
Community Names define an access environment for the VT5900-SA. It is recommended that you
change the Get and Set names to something unique as soon as possible.
• Select 1 to change the Community Name for GET.
• Select 2 to change the Community Name for SET.
• Select 3 to toggle traps on or off.
SNMP Configuration
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
Current SNMP Configuration:
Community Name for GET: public
Community Name for SET: private
Traps are disabled.
1) Change Community Name for GET
2) Change Community Name for SET
3) Toggle Trap
X) Return to previous menu