Virtual TapeServer SCSI-to-FC Adapter User Manual

7-9
Chapter 7: Using the Serial/Telnet Interface
If SNMP Traps are disabled, no Trap events are sent.
Figure 7-7. SNMP configuration menu with traps enabled
• Select 4 to change one of a maximum of three Manager IP Addresses for Traps. The Trap
Manager IP address is the address used for sending Trap notifications. Typically, this is the IP
address of the machine using the network management application and/or a MIB browser.
SNMP Configuration
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
Current SNMP Configuration:
Community Name for GET: public
Community Name for SET: private
Traps are enabled.
1) Change Community Name for GET
2) Change Community Name for SET
3) Toggle Trap
4) Modify Trap Manager IP Addresses and Filters
X) Return to previous menu
Note: Be sure to correctly set the clock and date in the Real Time Clock
Configuration menu so that event logging is accurate.