Virtual TapeServer SCSI-to-FC Adapter User Manual

7-10
Chapter 7: Using the Serial/Telnet Interface
Trap Configuration
The Trap Configuration menu is accessible through the SNMP Configuration menu and allows for
the set up of IP addresses for Trap Managers.
Figure 7-8. Trap IP address configuration menu
Select 1 through 3 to set a Manager IP address for Traps. The Trap Manager IP address is the
address used for sending Trap notifications. Typically, this is the IP address of the machine using
the network management application and/or a MIB browser.
Current settings are shown for each menu option.
Trap IP Address Configuration
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
SNMP Trap Manager Configuration :
Trap Manager 1 (Disabled)
IP Address: 1.1.1.1 Port#: 162 Trap Filter: 1
Trap Manager 2 (Disabled)
IP Address: 1.1.1.1 Port#: 162 Trap Filter: 1
Trap Manager 3 (Disabled)
IP Address: 1.1.1.1 Port#: 162 Trap Filter: 1
1) Change Trap Manager 1 Settings.
2) Change Trap Manager 2 Settings.
3) Change Trap Manager 3 settings.
X) Return to previous menu