Virtual TapeServer SCSI-to-FC Adapter User Manual

7-16
Chapter 7: Using the Serial/Telnet Interface
Figure 7-12. Alternate LUN Reset menu
Following are descriptions for each of the settings:
– Select 1 to use a normal LUN reset code to recover from a bus problem by sending the
LUN reset directly to the drive specified.
– Select 2 to use an alternate method that releases reservations and clears tasks for the spec-
ified device.
• Select 8 to toggle Forcing FLOGI when in private loop between ENABLED and
DISABLED.
• Select A from the Fibre Channel Configuration Menu to toggle the port speed between 1 and
2 Gb/s for the selected FC port
• Select B from the Fibre Channel Configuration Menu to change the port initialization delay.
Alternate LUN Reset
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
FOR ALL PORTS: LUN Reset mode is undefined so normal will be used
1) ALL PORTS: Use Normal pass through LUN Reset
2) ALL PORTS: Use Alternate LUN Reset behavior
x) Return to configuration menu