Virtual TapeServer SCSI-to-FC Adapter User Manual

7-18
Chapter 7: Using the Serial/Telnet Interface
• Select 6 to edit the SCSI target override settings. Select a SCSI target to override. Then, use
the SCSI Parameter Override configuration menu to make changes to the target.
Figure 7-14. SCSI Parameter Override configuration menu
– Select 1 to toggle CDB Length Override.
– Select 2 to toggle Wide Negotiation.
– Select 3 to toggle Synchronous Negotiation.
– Select 4 to toggle Synchronous Parameter Override.
– Select 5 to toggle Alternate Block Size.
SCSI Parameter Override Configuration Menu
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
Bus 0, Target 0 Current Configuration:
CDB Length Override *Disabled*
Wide Negotiation *Enabled*
Synchronous Negotiation *Enabled*
Synchronous Parameter Override *Disabled*
Alternate Block Size *Disabled*
1) Toggle CDB Length Override
2) Toggle Wide Negotiation
3) Toggle Synchronous Negotiation
4) Toggle Synchronous Parameter Override
5) Toggle Alternate Block Size
X) Return to previous menu