Virtual TapeServer SCSI-to-FC Adapter User Manual

7-22
Chapter 7: Using the Serial/Telnet Interface
The following is an example of an FCP map:
Figure 7-18. Current FC port map display
• Select 3 from the Device Mapping Main Menu to create a new map. This option allows adding
a new map for the current protocol/port or bus. Once the map is created it becomes the
‘current’ map.
Current Map Display
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
Port Map Display
Map: FCP Port 0: Name 'Auto Assigned'
+--------++------+------+------+------+----------------------------------+
| FC LUN || Prtl | Port | TYPE | STAT | Protocol Specific Information |
+--------++------+------+------+------+----------------------------------+
| 0 || AF | 0 | CTLR | UP | Lun= 0 |
| - || - | - | - | - | HEWLETT PACKARD VT5900 |
+--------++------+------+------+------+----------------------------------+
Page # 1 out of 1 pages.
Number of entries in the Map = 1
Enter(N=Next, P=Prev, X=Exit) >
Note: Because the entire list of devices may not fit on one screen, select ‘N’ or
‘P’ to go back and forth between screens displaying more devices. Select ‘X’ to
return to the ‘Device Mapping Main Menu’.