Virtual TapeServer SCSI-to-FC Adapter User Manual

7-23
Chapter 7: Using the Serial/Telnet Interface
Figure 7-19. Create new current map
• Select 4 from the Device Mapping Main Menu to delete current map. The screen will ask for
confirmation before deleting the map. After the map has been deleted, the default map for the
current port becomes the current map. Maps with names ‘Auto Assigned’ or ‘SCC Map’ may
not be removed.
Figure 7-20. Delete current map
• Select 5 from the Device Mapping Main Menu to edit current map. This option displays the
Map Edit Menu and allows user to edit the name of the map, change content of the map,
clear, and fill the map. Editing an ‘Auto Assigned’ or ‘SCC Map’ is not allowed.
Create New Current Map
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
Create FCP Map on Port 0
Enter New Map Name (X=Cancel) > New Map
Created Map: ‘New Map’ at FC Port 0 with ID=4
This will delete current map - 'New Map', ID=4.
Are you sure (y/n)? > y
Map: 'New Map' with ID=4 was deleted