Virtual TapeServer SCSI-to-FC Adapter User Manual

7-29
Chapter 7: Using the Serial/Telnet Interface
unmapped devices at the end of the ‘current’ map. Devices marked as ‘DOWN’ will not be
mapped. After this operation completes, the Edit Map Entries screen will appear.
• Select 6 from the Device Mapping Main Menu to clone ‘Current’ map. This option allows the
user to make an exact copy of already existing map complete with all entries. Cloning of ‘Auto
Assigned’ or ‘SCC Map’ is not allowed. The new map must have a unique map id and name.
Once cloning is complete, the newly created map becomes ‘Current’ map. The purpose of this
option is to create a base for a new map that is similar to an already existing map.
Figure 7-30. Clone current map
• Select 7 from the Device Mapping Main Menu to edit the host list for the current port/protocol.
The ‘Current’ map can be associated with hosts available in the host list on the same port
where the map is defined. Initially all hosts are associated with an Auto Assigned map. These
are ‘built at runtime’ hosts. They cannot be edited or deleted; their name cannot be changed.
Clone Current Map
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
Clone Map: FCP Port 1: Name 'Indexed'
Enter New Map Name (X=Cancel) >