Virtual TapeServer SCSI-to-FC Adapter User Manual

7-32
Chapter 7: Using the Serial/Telnet Interface
Figure 7-34. Editing host list for FCP port
• Select 8 from the Device Mapping Main Menu to display the entire device list. Because the
entire device list may not fit on one screen, select ‘N’ or ‘P’ to go back and forth between
screens displaying more maps. Select ‘X’ to return to the ‘Device Mapping Main Menu’.
Host List Edit Display
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
Current Map: FCP Port 0 - Name 'Indexed'
FCP Port# 0 Host List:
+----+---------------+---------------+-------------------++---------------+
| N# | Port WWN | Node WWN | Host Name ||Active Map Name|
+----+---------------+---------------+-------------------++---------------+
| 1 | Hi 0x210000E0 | Hi 0x200000E0 | || Default |
| | Lo 0x8B02C20E | Lo 0x8B02C20E | PortID = 0x0000EF || |
+----+---------------+---------------+-------------------++---------------+
Page # 1 out of 1 pages.
Total Number of Hosts = 1
Select Host Number(1 - 1) to associate host with the Current Map
Enter (N=Next, P=Prev, A=Add, D=Delete, E=Edit, X=Exit) > e
Select Host to edit (X=Cancel) > 1
Old Host Name:
Enter desired new name (<enter> = use old name) > New FCP Host
Old host's Port WWN High: 0x210000E0
Enter desired Port WWN High(<enter> = use old Port WWN High) >
Old host's Port WWN Low: 0x8B02C20E
Enter desired Port WWN Low(<enter> = use old Port WWN Low) >
Old host's Node WWN High: 0x200000E0
Enter desired Node WWN High(<enter> = use old Node WWN High) >
Old host's Node WWN Low: 0x8B02C20E
Enter desired Node WWN Low(<enter> = use old Node WWN Low) >