Virtual TapeServer SCSI-to-FC Adapter User Manual

7-36
Chapter 7: Using the Serial/Telnet Interface
If the Enter key is selected, the next page of trace levels appears as follows:
Figure 7-38. Trace settings, next page
Enter a level number from the Trace Settings that are shown. This toggles the current setting to
either ON or OFF.
Select U to update current operating trace levels. This option forces the currently displayed trace
settings to become effective immediately, without requiring a reboot or power cycle.
Trace Settings
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
0) SG List : OFF
1) Timing : OFF
2) FCP/RMI : OFF
3) AF : OFF
4) INBAND : OFF
5) Multi-Host Lib : OFF
6) Queue Element : OFF
7) HP Trace Enable : OFF
U) Update Current Operating Trace Levels
X) Return to previous menu
Enter the trace level index, <enter> for next page >
Note: Be sure to set the clock and date in the Real Time Clock Configuration
menu so trace logging is accurate.