Virtual TapeServer SCSI-to-FC Adapter User Manual

7-40
Chapter 7: Using the Serial/Telnet Interface
Active Fabric Configuration
When this option is selected from the Perform Configuration menu from the Main menu, the
Active Fabric Menu appears.
Figure 7-42. Active Fabric configuration menu
• Select 1 to change the number of controller LUNs reported by the VT5900-SA. This value can
be set to a number in the range of 0 to 4.
• Select 2 to change the location of LUNs in an auto-assigned map. LUNs can be positioned
starting at the beginning (first location) or at the end (last location) of the map.
For more information on controller LUNs and Extended Copy commands, see Appendix B.
Active Fabric Configuration Menu
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
Current Active Fabric Configuration:
Server Free Backup Mode : DISABLED
Number of Controller LUNS (0-4) : 0
Controller LUNS in auto-assigned map go: last
1) Change number of Controller LUNs
2) Change location of luns in auto-assigned map
X) Return to previous menu