Virtual TapeServer SCSI-to-FC Adapter User Manual

7-44
Chapter 7: Using the Serial/Telnet Interface
– Select 2 from the System Status Menu to display active tasks.
– Select 3 from the System Status Menu to display stack usage.
– Select 4 from the System Status Menu to display SCSI Protocol Resources.
– Select 5 to display Ethernet resources.
• Select 2 from the System Status/Statistics Menu to display Fibre Channel Protocol Status.
Figure 7-47. Fibre Channel status menu
– Select 1 from the Fibre Channel Status Menu to display Fibre Channel Link Status. Figure
7-44 below shows the status and statistics for a Fibre Channel loop. Similar data can also
be shown for a Fibre Channel fabric.
Fibre Channel Status Menu
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
1) Display Fibre Channel Link Status
2) Display Attached Fibre Channel Devices
3) Display FC Resource Status
4) Display FC Driver Resource Status
5) Display FC SegCmd_Q Resources
X) Return to main menu