Virtual TapeServer SCSI-to-FC Adapter User Manual

7-46
Chapter 7: Using the Serial/Telnet Interface
SignalLosses is the number of times Loss of Signal was detected.
SyncLosses is the number of times Loss of Sync. was detected.
BadRxChars is the number of bad characters received.
LinkFailures is the number of Link Failure conditions.
BadCRCFrames is the number of frames received with a bad CRC.
ProtocolErrs is the number of protocol errors detected.
BadSCSIFrames is the number of BAD SCSI frames detected.
UnderflowErrs is the number of underflow errors detected.
Press the Enter key to view status information for the next FC port.
Select A to have the status information refreshed.
– Select 2 from the Fibre Channel Status Menu to display Attached Fibre Channel Devices.