Virtual TapeServer SCSI-to-FC Adapter User Manual

7-47
Chapter 7: Using the Serial/Telnet Interface
Figure 7-49. Fibre Channel device display
Select R to refresh the device display (as shown in the menu above) with the latest status infor-
mation and perform Manual FC Discovery (as set in the Fibre Channel Configuration Menu,
described on page 6-6 of this manual).
Select D to display device details.
– Select 3 from the Fibre Channel Status Menu to display FC Resource Status.
Fibre Channel Device Display
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
FC Port: 0 Port id: 0x000001
R) Refresh Device Display
D) Display Device Details
X) Return to previous menu
Port 0: Requesting discovery
Doing device discovery on port 0...
Completed discovery on port 0
Fibre Channel Device Display
Version X.X XXXX
FC Port: 0 Port id: 0x000001
Port 0: TARGET DEVICE (UP) Port id: 0x000010
SEAGATE ST39103FC Revision: 0003 ANSI SCSI Revision: 02 Type: Direct Access
R) Refresh Device Display
D) Display Device Details
X) Return to previous menu