Virtual TapeServer SCSI-to-FC Adapter User Manual

7-49
Chapter 7: Using the Serial/Telnet Interface
– Select 1 from the Parallel SCSI Protocol Status Menu to display SCSI statistics. Select C
to clear the counters.
Figure 7-53. SCSI device display menu
– Select 2 from the Parallel SCSI Protocol Status Menu to display attached SCSI devices.
Figure 7-54. SCSI device display menu
– Select 1 to issue discovery for all SCSI buses.
– Select 2 to issue discovery for selected SCSI bus.
– Select 3 to issue boot discovery (includes resets and delays).
– Select 4 to display all local SCSI devices.
– Select 5 to display local devices on specified SCSI bus.
SCSI Statistics
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
BUS NUMBER 0
Connection Mode [HVD]
Resets ...........................5
BUS NUMBER 1
Connection Mode [HVD]
Resets ...........................8
C) Clear Counters
X) Return to previous menu
SCSI Device Display Menu
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
1) Issue discovery for all buses
2) Issue discovery for selected bus
3) Issue boot discovery(includes resets and delays)
4) Display all local devices
5) Display local devices on specified bus
X) Return to previous menu