Virtual TapeServer SCSI-to-FC Adapter User Manual

7-53
Chapter 7: Using the Serial/Telnet Interface
• Select 2 to display the SCSI Command Tracking information for all selected hosts and
devices.
• Select 3 to set the data to be displayed in terms of Type (Device, Host, ALL), Protocol (FC,
SCSI, Other, ALL), and Specific (ID or ALL). If ID is selected for Specific, this ID can be an
FC LUN, Switch ID (S_ID), or other ID.
• Select 4 to clear the log of all previously recorded results.
Active Initiators, Device Entries, and Host Statistics
Select option 6 from the System Utilities menu to view active initiators, device entries, and host
statistics from the Display Active Initiator Menu.
Figure 7-59. Display Active Initiator menu
• Select 1 to display the active initiators.
Display Active Initiator Menu
X.X.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/07/2010 10:31:55
1) Display Active Initiators
2) Display Device Entries
3) Display Host Statistics
4) Clear Host Statistics
X) Return to main menu