Virtual TapeServer SCSI-to-FC Adapter User Manual

8-4
Chapter 8: Using the FTP Interface
4. Specify binary mode:
bin
5. Specify the firmware’s path and filename (.dlx file) with the put command:
put <path:filename.dlx>
The file will transfer and the VT5900-SA will reboot. The VT5900-SA will then be using the
new firmware.
This completes “Chapter 8, Using the FTP Interface”.
Note: You may want to confirm the new firmware level by checking the reboot messages on the
VT5900-SA through the serial interface.