Virtual TapeServer SCSI-to-FC Adapter User Manual

C-2
Appendix C: Addressing, Structures, and Operation
Table C-4. Peripheral Device Addressing
The VT5900-SA supports the Peripheral Device Addressing Method and the Logical Unit
Addressing Method, depending on the configuration.
Table C-5. Arbitrated Loop Node number to AL_PA lookup table
The data shown in Table C-5 comes from the Fibre Channel Configuration Menu (setting the
AL_PA value) on the VT5900-SA. The user enters the node number (number to the left of the
colon from Table C-5) and the VT5900-SA translates the node number into the corresponding
AL_PA value (number to the right of the colon in Table C-5).
Bit
Byte
7 6 5 4 3 2 1 0
N 0 0 Bus
N+1 Target/LUN
0:0x01 21:0x2E 42:0x52 63:0x74 84:0xA6 105:0xC9
1:0x02 22:0x31 43:0x53 64:0x75 85:0xA7 106:0xCA
2:0x04 23:0x32 44:0x54 65:0x76 86:0xA9 107:0xCB
3:0x08 24:0x33 45:0x55 66:0x79 87:0xAA 108:0xCC
4:0x0F 25:0x34 46:0x56 67:0x7A 88:0xAB 109:0xCD
5:0x10 26:0x35 47:0x59 68:0x7C 89:0xAC 110:0xCE
6:0x17 27:0x36 48:0x5A 69:0x80 90:0xAD 111:0xD1
7:0x18 28:0x39 49:0x5C 70:0x81 91:0xAE 112:0xD2
8:0x1B 29:0x3A 50:0x63 71:0x82 92:0xB1 113:0xD3
9:0x1D 30:0x3C 51:0x65 72:0x84 93:0xB2 114:0xD4
10:0x1E 31:0x43 52:0x66 73:0x88 94:0xB3 115:0xD5
11:0x1F 32:0x45 53:0x67 74:0x8F 95:0xB4 116:0xD6
12:0x23 33:0x46 54:0x69 75:0x90 96:0xB5 117:0xD9
13:0x25 34:0x47 55:0x6A 76:0x97 97:0xB6 118:0xDA
14:0x26 35:0x49 56:0x6B 77:0x98 98:0xB9 119:0xDC
15:0x27 36:0x4A 57:0x6C 78:0x9B 99:0xBA 120:0xE0
16:0x29 37:0x4B 58:0x6D 79:0x9D 100:0xBC 121:0xE1
17:0x2A 38:0x4C 59:0x6E 80:0x9E 101:0xC3 122:0xE2
18:0x2B 39:0x4D 60:0x71 81:0x9F 102:0xC5 123:0xE4
19:0x2C 40:0x4E 61:0x72 82:0xA3 103:0xC6 124:0xE8
20:0x2D 41:0x51 62:0x73 83:0xA5 104:0xC7 125:0xEF