Virtual TapeServer SCSI-to-FC Adapter User Manual

E-8
Appendix E: Management Information Bases
Enterprise MIB
The Enterprise MIB can be accessed over Ethernet. The current implementation of the MIB sup-
ports Read-only functionality. Information is broken down into ‘config’, ‘topology’, and ‘utilities’
nodes. The config node provides information about the static configuration settings for the
VT5900-SA. The topology node provides information about all of the devices that are attached to
the VT5900-SA, the current map settings for these devices, and the maps used by initiators. The
utilities node provides information about the current status of the VT5900-SA, port and bus statis
-
tics, and various system logs that can be used for diagnostic purposes. For more information on
accessing the Enterprise MIB, contact a HP services representative.
Enterprise MIB Table
The following table contains all the elements within the Enterprise MIB.
1.3.6.1.6.1.3 snmpCONSDomain NODE
1.3.6.1.6.1.4 snmpDDPDomain NODE
1.3.6.1.6.1.5 snmpIPXDomain NODE
1.3.6.1.6.2 snmpProxys NODE
1.3.6.1.6.2.1 rfc1157Proxy NODE
1.3.6.1.6.2.1.1 rfc1157Domain NODE
1.3.6.1.6.3 snmpModules NODE
OID Name Type
0
ccitt NODE
0.0
zeroDotZero NODE
1
iso NODE
1.3
org NODE
1.3.6
dod NODE
1.3.6.1
internet NODE
1.3.6.1.1
directory NODE
1.3.6.1.2
mgmt NODE
1.3.6.1.2.1
mib-2 NODE
1.3.6.1.2.1.10
transmission NODE
1.3.6.1.3
experimental NODE
1.3.6.1.4
private NODE