Virtual TapeServer SCSI-to-FC Adapter User Manual

2-8
Chapter 2: Getting Started
Interfaces and Connections
There are four types of data interfaces to the VT5900-SA:
•Fibre Channel
•SCSI
• RS-232 (RJ-11 Serial port)
•Ethernet
The RS-232 and Ethernet ports are used primarily for VT5900-SA configuration and management.
Figure 2-9. Port locations
Figure 2-10. WWN/MAC ID label
Note: For convenience in configuring ports, key information is indicated on a label located on the
back panel of the VT5900-SA.
Air-exhaust
Vents
Fibre Channel port
Ethernet port
Serial port
Reset Button Access
Power
switch
SCSI buses
WWN Name
WWP Name
Ethernet MAC ID (Physical Address)
Power Information