Virtual TapeServer SCSI-to-FC Adapter User Manual

2-12
Chapter 2: Getting Started
Figure 2-15. VT5900-SA SCSI connection
4. Power on the SCSI devices on this bus, but not the VT5900-SA.
5. After all the SCSI devices on this bus have completed their individual POST (Power-On Self
Test) processes, power on the VT5900-SA.
Ethernet Connection
10/100BaseT Ethernet connectivity provides enhanced management and configuration
capabilities. The RJ-45 connector on the unit can be directly connected to a standard 10/100BaseT
Ethernet network.
Setting the IP network address is recommended, but not required, in order to configure the
VT5900-SA from this port. The IP network address can be manually assigned or dynamically
assigned (using DHCP).
Ethernet capabilities include Telnet, SNMP, and an HTTP interface known as Visual Manager for
configuration and management. FTP is also supported for other management capabilities.
Figure 2-16. VT5900-SA Ethernet port
Note: The VT5900-SA is configured to use DHCP by default.
SCSI buses
Ethernet port