Virtual TapeServer SCSI-to-FC Adapter User Manual

iii
Product Safety
Laser Safety
Certification and Classification Information
This product uses Small Formfactor Transceivers (SFFs) to interface with Fibre Channel links.
Optical SFFs shipped with this product contain internal lasers. In the USA, all optical SFFs
shipped with this unit are certified as Class 1 laser products and complies with 21 CFR, 1040.10
and 1040.11.
Outside the USA, all SFFs are certified as Class 1 laser components that conform to the
requirements contained in the International Electrotechnical Commission (IEC) standard 825
(1994) and Amendment 1 (1990) along with the CENELEC (European Committee for
Electrotechnical Standardization) European Normalization standard EN 60825 (1992).
Certifications include one or more of the following:
• Recognized Component by Underwriters Laboratories
• Certified by the Canadian Standard Association
• Certified by VDE (Germany) and/or Certified by Statens Provningsanstalt (SP) in Sweden
The following shows the Class 1 information label specified in IEC 825 and CENELEC HD 482
51. This label is attached to this product.
Product Information
Each Fibre Channel communications port consists of a transmitter and receiver optical
subassembly. The transmitter subassembly contains internally a semiconductor laser diode.
Usage Restrictions
Failure to comply with these usage restrictions may result in incorrect operation of the system and
points of access may emit laser radiation above the Class 1 limits established by the IEC and U.S.
DHHS.
See Appendix H for regulatory statements.
Class 1 Laser Product
Laser Klasse 1
Luckan 1 Laserlaite
Warning: There are no user maintenance or service operations or adjustments to be performed
on the SFF.