Virtual TapeServer SCSI-to-FC Adapter User Manual

6-7
Chapter 6: Using Visual Manager
Main Menu → System → Network
This menu allows for setting up network settings.
Figure 6-6. Network screen
To make any changes, modify the entries as described below and then select the Submit button.
• Hostname is an alphanumeric entry of one word up to 8 characters long. To change this entry,
enter a new hostname and select the Submit button.
• Ethernet Mode can be toggled among the following options:
10Mps Only
100Mps (half duplex) Only
100Mps (full duplex) Only
10/100Mps (Auto-Neg.)
• IP address is the IP address of the VT5900-SA.
• Subnet Mask is the IP subnet mask for the VT5900-SA. The default setting is 255.255.255.0.
• IP Gateway is the IP address of the gateway for the Ethernet network connected to the
VT5900-SA. The default setting is 0.0.0.0.
• DHCP enables/disables support for Dynamic Host Configuration Protocol (DHCP). When
enabled, the VT5900-SA will retrieve a dynamic IP address from a DHCP server located on
the Ethernet network that the VT5900-SA is connected to. Once DHCP is enabled, it is neces
-
sary to reboot the VT5900-SA before an IP address will be requested from the DHCP server.