Virtual TapeServer SCSI-to-FC Adapter User Manual

6-9
Chapter 6: Using Visual Manager
Main Menu → System → SNMP
This menu allows for SNMP options to be configured.
Figure 6-8. SNMP screen
To make any changes, modify the entries as described below and then select the Submit button.
The SNMP GET community name is checked for each GET request received. The community
name in the SNMP packet must match the one here to complete the SNMP GET request. Set your
SNMP manager to the same GET and SET community names as the VT5900-SA.
Community Names define an access environment for the VT5900-SA. It is recommended that you
change the Get and Set names to something unique as soon as possible.
• Community Name – GET has a default setting of ‘public’.
• Community Name – SET has a default setting of ‘private’. This option is only applicable for
the FA MIB 2.2. See Appendix E for more information.
• Traps enable/disable SNMP traps for manager IP addresses. If Traps are disabled, no Trap
events are sent. If Traps are enabled, up to three manager IP addresses can be setup for traps.
• Trap Manager IP Address is the address used for sending Trap notifications. Typically, this is
the IP address of the machine using the network management application and/or a MIB
browser.