Virtual TapeServer SCSI-to-FC Adapter User Manual

6-10
Chapter 6: Using Visual Manager
• Trap Manager Filter Setting is used to set filtering of event notifications. The level of filtering
selected will also log all filter levels indicated above it. The filters that can be set include:
Disable Event Traps
Emergency events
Alert events
Critical events
Error events
Warning events
Notify events
Info events
Debug events
Trap all events
Trapped events are logged in an event log. Event logging captures over 2000 events and then
starts overwriting the log when full.
• Row State can be set to an integer in the range of 0 through 3.
Disabled (0): Clears to the default settings.
No traps (1): No traps exist.
Row Exist (2): Row created in inactive mode; row exists but
traps are not sent to target.
Send Traps (3): Row created in active mode; row exists and
traps are sent to target.
Note: Be sure to correctly set the clock and date in the Real Time Clock Configuration menu so
that event logging is accurate.